there are 2 types of anchors namely: mechanical anchors & chemical anchors. since our topic is how to install an expansion bolt, then let's dwell on the mechanical side.
instructions:
1. drill a hole into the concrete using a hammer drill. do not use impact drill or steel drill because it will take a while before you can make a hole. also, you have to exert extra strength and effort to push the drill. by the way, the drillbit should be the same diameter as the bolt.
2. clean the hole using steel brush and blow-out pump.
3. install the anchor and slightly hammer it with a hammer so it will fit in all the way.
4. tighten it.
6 Surprising Heart Attack Triggers
13 years ago
Wheel Bolt Supplier, Wheel Bolt Manufacturer from India
ReplyDeleteWe offer all types of Hub Bolts/ Wheel Bolts, Revolving Nuts, Washers etc. We offer these in cold forming and hot forged for all 4 wheel Vehicles Truck and Trailers.
Wheel Bolt, Wheel Nut, Washer, Nut, Bolt
Addresses:-
WINDSOR
Plot No. 766,
Pace City II, Sector37
Gurgaon122001
INDIA
Tel : 0091 124 4323900 / 924
Fax : 0091 124 4323999 / 998
Website:- http://hexboltindia.com/
Email id:- hexboltsindia@gmail.com
Its really very nice and informative blog. More over i want to ask about trailer parts for our automotive industries.
ReplyDelete